Airport walkways

During the evolution of air transport And in the necessary search for process efficiency, such as increasing airport security, professionals in the aviation sector were able to develop mobile bridges between the terminal buildings and the parked aircraft.

A definition of airport walkways would be: mobile devices integrated into the airport system that allow for connection between the boarding gates of the restricted area of the Terminal Building and the aircraft access gates.

Walkways are highly useful elements for improving efficiency and safety in passenger boarding and the airport operations that take place around them.

The use of catwalks contributes to passenger comfort They avoid having to walk to the aircraft or have to wait for the garden carts (specific buses for passenger transport on platform) to bring them to the remote parking area where their flight is waiting. They improve the order at boarding or disembarking and reduce the number of runway equipment needed, as well as the presence of passengers on the platform. increasing the efficiency of the operation and increasing safety during the stopover.

But what factors are taken into account when designing a catwalk?:

  • Type of aircraft to provide service today and in the future.
  • Type of terminal and its compatibility with this device.
  • Security
  • Minimal operational failures.
  • Minimum maintenance required.
  • Economy.

The catwalks must have a width sufficient for two people to walk side by side simultaneously. In normal conditions, the Passenger flow The number of passengers that can use a walkway is around 30-55 per minute.

The design of a catwalk is planned with the understanding that it must always be operated safely, even in extreme conditions such as a storm. As a curious fact, in this regard, in their folded position they must be capable of withstanding winds of up to 150 km/h and 90 km/h in the extended position.

In addition, in all cases, the walkways are equipped with the regulatory lighting for navigation so that they are perfectly visible in any condition in which the airport may operate.

There are two types of catwalks:

The telescopic catwalks They are the ones that offer the highest degree of versatility for connecting to all types of aircraft.

Its length depends on the height of the floor of the Terminal Building and the lower level of the aircraft door. Sometimes the height of the building is corrected by means of a fixed Terminal-Platform link corridor with a staircase or ramp. The length is adjusted so that no slopes exceeding +5 and -10% with respect to the horizontal are produced when the aircraft and terminal are connected.

The Fixed-type catwalk It is similar to the previous one, although with more limitations. It only has a vertical axis of rotation and a platform for connection to the aircraft without angular displacement.

 

What elements make up a catwalk:

 

  • Rotary roundabout:

It is the part that connects the mobile walkway to the fixed walkway that provides access to the terminal. It consists of a rotating platform that is supported by a large-sized bearing. The roundabout is connected to the mobile part that can rotate vertically and horizontally to be connected to the aircraft.

  • Telescopic corridor:

It consists of two sections of metal bridge, one fixed and the other extensible. The interiors are constructed of lightweight material. The floor is covered with anti-slip material to facilitate the ascent and descent of the passengers. The materials used must be resistant to corrosion.

This corridor has an attached staircase on the right side of the mobile bridge, to allow access to/from the aircraft to the ramp, which is only usable for runway operators.

The useful width of the passageway for passenger circulation is at least 1.6 meters.

At the connection point between the fixed bridge and the extendable one, a ramp is installed to avoid the step that occurs between the two.

From the point of view of accessibility, there are several measures that must be in place in all cases, such as the fact that a handrail must be installed on the right side of the walkway or that the entire walkway must be sufficiently well-lit.

  • Connecting platform to the plane (bridge head):

It is a rotating platform connected to the extendable section of the walkway, which allows it to be connected to the plane's door.

The bridge head is entirely made of lightweight metals that are resistant to corrosion.

It must have a rotating disc that allows for a perfect connection between the ground and the plane's door, in case the axes of this and the walkway are not perfectly perpendicular. A rubber protection is mounted at the end of the rotating disc to avoid damaging the plane's fuselage in the slightest way.

It is in this part of the catwalk that their control panel is located.

The outer part of the platform opening is flexible, allowing for precise adjustment to the walls of the different aircraft. The head has lighting to enable connections to be made at night.

  • Elevating/ascending system

It is carried out using hydraulic cylinders mounted on a platform that, in turn, serves as a guide.

The cylinders are driven by a two-flow hydraulic pump, which also drives the cylinders of the telescopic movement. These cylinders are designed to withstand the necessary loads for long periods without changing position. The lifting speed is approximately 0.7m/min.

The lifting movement is controlled manually by means of controls, or automatically by means of a leveling mechanism.

  • Extension/retraction system

The function of this element is to support, rotate the wheels and raise the movable bridge. The actuator is entirely made of steel. Its operation and that of the bridge is usually electrohydraulic and consists of an electric motor that drives a pump that feeds the drive motors integrated into the wheels and the support cylinders.

The actuator usually has two non-pneumatic twin wheels. The actuator sends the hydraulic power to lift the bridge over a pair of clamps located on both sides of the bridge and supported in turn on a rotating shaft that allows for automatic correction of the angles that the mobile bridge describes to adapt to the different door heights of the aircraft.

The hydraulic wheel drives must be built independently for each side. In this way, in the event of a failure of one unit, it is possible to operate with the other at half its capacity.

  • Rotation system

It is formed by a self-propelled tractor. The drive is provided by two driving wheels. The tractor serves as the base for the vertical movement guide platform.

  • Electrical safety components

To effect any movement of the walkway, a manual “dead man” switch is used; that is, when the operator stops applying force to operate it, the movement is immediately interrupted.

This switch has an extendable cable, which allows the operator to move around to check the movements and the perfect connection of the aircraft.

On both sides of the rubber protection of the connection platform, a series of micro-antenna switches are usually installed; when activated, they immediately stop the movement of the walkway.

To the right of the connection platform there is a levelling mechanism consisting of a wheel that comes into contact with the aircraft. If for any reason that wheel does not contact the aircraft fuselage, an alarm signal is triggered.

 

The catwalks are elements of great utility and very safe for passengers. As an architectural element, there are different models with finishes in keeping with the style of the terminal to which they belong.

As until now, the evolution of the catwalks continues. linked to the evolution of the aircraft themselves. As was the case back then, three-arm runways were designed to serve the A380; it is possible that we will see innovative designs if new aircraft with different formats to the current ones appear in the future, such as KLM's Flying V or AIRBUS' Maveric. Time will tell.

 

Airport walkways

 

Share

More topical issues

Portaviones
17/11/2026

The first aircraft carrier

Micromissile FOX
13/11/2026

AERTEC is making progress with the validation of the FOX micro-missile, designed for drones

SAETA II program
05/11/2026

AERTEC will develop the Remote Interface Unit (RIU) for the SAETA II program

Zephyr HAPS
27/10/2026

AERTEC and AALTO are joining forces to drive the future of stratospheric aviation

Airbus A300
20/10/2026

The Airbus A300 and the flight that changed the course of European aviation

Access to restricted airport areas
13/10/2026

Airport security: access to restricted areas

Contact